- Details
- Features
- Reviews
ADAM SUB 7 PRO 140W 1x7" Subwoofer
ADAM subwoofers
Our subwoofers are dedicated to ADAM Audio’s primary goal: the best possible authenticity in the reproduction of music. For our subwoofers, this means combining power and precision while simultaneously avoiding “impressive” bass volume at the cost of accuracy. Their task is it to complement the highly acclaimed lucidity and transparency of the ADAM monitors in the lower and lowest frequencies.
All subwoofers up to the Sub2100 feature both balanced (XLR) and unbalanced (RCA) in and output connectors, and numerous controls to adapt to different room acoustics and requirements.
“I recommend it highly to anyone looking for a top-notch subwoofer.” Tape Op on the Sub12 (Feb/March 2009)
Panel/Controls
All subwoofers up to the Sub2100 feature a number of controls to adapt to different room acoustics and requirements.
All units have a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a ‘signal-on/continuous’ switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.
Sub7
The Sub7 has been designed to complement smaller monitors like the AX-Series´models A3X, A5X, and A7X. Its small footprint allows for an easy placement even in small environments.
The front panel features two motorized potentiometers that let you adapt the input level and crossover frequency settings for the best performance. These pots can also be controlled with an included wireless remote control, allowing you to optimize your sound reproduction from your ideal listening position.
Connectors and controls
The Sub7 is equipped with both balanced (XLR) and unbalanced (RCA or Cinch) in and output connectors and numerous controls. A 0°/180° phase switch and a switchable 85Hz highpass filter allows you to find the best settings for an ideal sound and performance.
Combining depth and precision
The low cut off frequency of 32Hz (-3dB point) enables this subwoofer to reproduce register of even this range in a highly authentic manner.
Subwoofer
Number 1
Basket Ø 7" (178 mm)
Voice coil Ø 1.5" (38 mm)
Cone material Paper
Built-in Amplifiers
Subwoofer 1
Amp. power RMS / music 140 W / 210 W
Control panel
EQ 80 Hz -60 to +6 dB
Input connectors
Analog XLR / RCA
General data
Panel Front
Frequency response 32 Hz - 150 Hz
THD > 60 Hz ≤1 %
Max. peak ≥107 dB
Crossover frequencies 50 - 150 Hz
Input impedance 10 KOhm
Weight 17.6 lb (8 kg)
Height x Width x Depth 14.5" (370 mm) x 8" (200 mm) x 11" (280 mm)
Warranty 5 Years
Delivery contents
Remote control, Batteries (3 x AAA), Power cord, Manual
| Product Name | Adam Audio Sub7 PRO 140W 1x7" Subwoofer |
|---|---|
| Brand | ADAM Audio |
| Condition | New |
| Shipping Option | Free Shipping to the Continental U.S. |
- Subwoofer
- Number 1
- Basket Ø 7" (178 mm)
- Voice coil Ø 1.5" (38 mm)
- Cone material Paper
- Built-in Amplifiers
- Subwoofer 1
- Amp. power RMS / music 140 W / 210 W
- Control panel
- EQ 80 Hz -60 to +6 dB
- Input connectors
- Analog XLR / RCA
- General data
- Panel Front
- Frequency response 32 Hz - 150 Hz
- THD > 60 Hz ≤1 %
- Max. peak ≥107 dB
- Crossover frequencies 50 - 150 Hz
- Input impedance 10 KOhm
- Weight 17.6 lb (8 kg)
- Height x Width x Depth 14.5" (370 mm) x 8" (200 mm) x 11" (280 mm)
- Warranty 5 Years
- Delivery contents
- Remote control, Batteries (3 x AAA), Power cord, Manual
Adam Audio Sub7 PRO 140W 1x7" Subwoofer
Details
ADAM SUB 7 PRO 140W 1x7" Subwoofer
ADAM subwoofers
Our subwoofers are dedicated to ADAM Audio’s primary goal: the best possible authenticity in the reproduction of music. For our subwoofers, this means combining power and precision while simultaneously avoiding “impressive” bass volume at the cost of accuracy. Their task is it to complement the highly acclaimed lucidity and transparency of the ADAM monitors in the lower and lowest frequencies.
All subwoofers up to the Sub2100 feature both balanced (XLR) and unbalanced (RCA) in and output connectors, and numerous controls to adapt to different room acoustics and requirements.
“I recommend it highly to anyone looking for a top-notch subwoofer.” Tape Op on the Sub12 (Feb/March 2009)
Panel/Controls
All subwoofers up to the Sub2100 feature a number of controls to adapt to different room acoustics and requirements.
All units have a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a ‘signal-on/continuous’ switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.
Sub7
The Sub7 has been designed to complement smaller monitors like the AX-Series´models A3X, A5X, and A7X. Its small footprint allows for an easy placement even in small environments.
The front panel features two motorized potentiometers that let you adapt the input level and crossover frequency settings for the best performance. These pots can also be controlled with an included wireless remote control, allowing you to optimize your sound reproduction from your ideal listening position.
Connectors and controls
The Sub7 is equipped with both balanced (XLR) and unbalanced (RCA or Cinch) in and output connectors and numerous controls. A 0°/180° phase switch and a switchable 85Hz highpass filter allows you to find the best settings for an ideal sound and performance.
Combining depth and precision
The low cut off frequency of 32Hz (-3dB point) enables this subwoofer to reproduce register of even this range in a highly authentic manner.
Subwoofer
Number 1
Basket Ø 7" (178 mm)
Voice coil Ø 1.5" (38 mm)
Cone material Paper
Built-in Amplifiers
Subwoofer 1
Amp. power RMS / music 140 W / 210 W
Control panel
EQ 80 Hz -60 to +6 dB
Input connectors
Analog XLR / RCA
General data
Panel Front
Frequency response 32 Hz - 150 Hz
THD > 60 Hz ≤1 %
Max. peak ≥107 dB
Crossover frequencies 50 - 150 Hz
Input impedance 10 KOhm
Weight 17.6 lb (8 kg)
Height x Width x Depth 14.5" (370 mm) x 8" (200 mm) x 11" (280 mm)
Warranty 5 Years
Delivery contents
Remote control, Batteries (3 x AAA), Power cord, Manual
| Product Name | Adam Audio Sub7 PRO 140W 1x7" Subwoofer |
|---|---|
| Brand | ADAM Audio |
| Condition | New |
| Shipping Option | Free Shipping to the Continental U.S. |
Features
- Subwoofer
- Number 1
- Basket Ø 7" (178 mm)
- Voice coil Ø 1.5" (38 mm)
- Cone material Paper
- Built-in Amplifiers
- Subwoofer 1
- Amp. power RMS / music 140 W / 210 W
- Control panel
- EQ 80 Hz -60 to +6 dB
- Input connectors
- Analog XLR / RCA
- General data
- Panel Front
- Frequency response 32 Hz - 150 Hz
- THD > 60 Hz ≤1 %
- Max. peak ≥107 dB
- Crossover frequencies 50 - 150 Hz
- Input impedance 10 KOhm
- Weight 17.6 lb (8 kg)
- Height x Width x Depth 14.5" (370 mm) x 8" (200 mm) x 11" (280 mm)
- Warranty 5 Years
- Delivery contents
- Remote control, Batteries (3 x AAA), Power cord, Manual
Reviews
- Choosing a selection results in a full page refresh.
- Opens in a new window.