- Details
- Reviews
-
The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
-
Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
-
Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
-
Global Power Supply — designed to deliver maximum power no matter what country you work in
-
Built-in load, line voltage, input and output monitoring
-
Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location
Performance Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) ± 0.25 dBSignal to Noise Ratio below rated full-bandwidth power,
A-weighted> 108 dBTotal Harmonic Distortion (THD) at 1 watt into 8 ohms < 0.1%Total Harmonic Distortion (THD) Plus Noise at full rated power < 0.35%, 20 Hz to 20 kHzIntermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.35%Damping Factor (20 Hz to 100 Hz at 8 ohms) > 5000Crosstalk (below rated power, 20 Hz to 1 kHz) > 80 dBCommon Mode Rejection (CMR) (20 Hz to 1 kHz) > 55 dB, typically > 70 dBDC Output Offset (Shorted input) < ± 3 mVInput Impedance (nominal) 10 kilohms balanced, 5 kilohms unbalancedMaximum Input Level +20 dBu typicalLoad Impedance (Note: Safe with all types of loads)
Stereo: 1/2/4/8/16 ohms Bridge Mono: 2/4/8 ohmsInput Sensitivity (referenced to 8 ohm rated output) 1.4V, 32 dB gain, and 26 dB gainVoltage Gain (referenced to 8 ohm rated output) MAi-9000i:
37.9 dB to 23.0 dBRequired AC Mains Universal AC input, 100-240VAC , 50/60 Hz (±10%). Maximum AC mains voltage 264VAC.AC Line Connector Five cordsets supplied with amplifier (USA, UK, European, Australia, India)Construction Cooling Dual-zone, microprocessor controlled, continuously variable speed fans,
front-to-back airflowFront Panel Cast aluminum with integrated handles.Weight 28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping.Dimensions (W x H x D) 19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.Protection Amplifier is protected against reactive loads, faults and shorts. If one channel experiences a catastrophic failure, the entire amplifier will shut down.
Product Name | Crown MA9000I Power Amplifier |
---|---|
Brand | Crown |
Condition | New |
MPN | XMA9000IC |
UPC | 871015003115 |
Shipping Option | Free Shipping to the Continental U.S. |
Crown MA9000I Power Amplifier
-
The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
-
Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
-
Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
-
Global Power Supply — designed to deliver maximum power no matter what country you work in
-
Built-in load, line voltage, input and output monitoring
-
Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location
Performance Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) ± 0.25 dBSignal to Noise Ratio below rated full-bandwidth power,
A-weighted> 108 dBTotal Harmonic Distortion (THD) at 1 watt into 8 ohms < 0.1%Total Harmonic Distortion (THD) Plus Noise at full rated power < 0.35%, 20 Hz to 20 kHzIntermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.35%Damping Factor (20 Hz to 100 Hz at 8 ohms) > 5000Crosstalk (below rated power, 20 Hz to 1 kHz) > 80 dBCommon Mode Rejection (CMR) (20 Hz to 1 kHz) > 55 dB, typically > 70 dBDC Output Offset (Shorted input) < ± 3 mVInput Impedance (nominal) 10 kilohms balanced, 5 kilohms unbalancedMaximum Input Level +20 dBu typicalLoad Impedance (Note: Safe with all types of loads)
Stereo: 1/2/4/8/16 ohms Bridge Mono: 2/4/8 ohmsInput Sensitivity (referenced to 8 ohm rated output) 1.4V, 32 dB gain, and 26 dB gainVoltage Gain (referenced to 8 ohm rated output) MAi-9000i:
37.9 dB to 23.0 dBRequired AC Mains Universal AC input, 100-240VAC , 50/60 Hz (±10%). Maximum AC mains voltage 264VAC.AC Line Connector Five cordsets supplied with amplifier (USA, UK, European, Australia, India)Construction Cooling Dual-zone, microprocessor controlled, continuously variable speed fans,
front-to-back airflowFront Panel Cast aluminum with integrated handles.Weight 28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping.Dimensions (W x H x D) 19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.Protection Amplifier is protected against reactive loads, faults and shorts. If one channel experiences a catastrophic failure, the entire amplifier will shut down.
Product Name | Crown MA9000I Power Amplifier |
---|---|
Brand | Crown |
Condition | New |
MPN | XMA9000IC |
UPC | 871015003115 |
Shipping Option | Free Shipping to the Continental U.S. |
- Choosing a selection results in a full page refresh.
- Opens in a new window.