- Details
- Features
- Tech Specs
- Reviews
Gibson is proud to introduce the new Falcon 20 1x12 Combo amplifier. It pays homage to Gibson’s legendary past as one of the world’s first manufacturers of electric guitar amplifiers. The Falcon 20 resurrects the Gibson amp icon and delivers vintage tone, reimagined in an upgraded rendering with valuable new features and all the original magic intact, and then some.
While inspired by the Gibson Falcon amps from the 1960s, this all-new Petaluma, California, USA-built design from renowned amp pioneer Randall Smith and the MESA/Boogie Design Team sets a new bar in low-power tone. The Falcon 20 stands apart from its predecessors due to the constructional upgrades and tonal improvements unearthed over Randall’s five decades of tube amp design experience and performance- pushing ideology that deliver nothing less than astonishing results.
The Falcon 20 features single-channel simplicity with a focus on great tone and ease of use. The ultra-simple, pure signal path design has controls consisting of Volume and Tone, plus the addition of footswitchable Reverb and Tremolo, which add dimensionality and motion and immensely increase the amp’s enjoyment and usefulness over a wide range of musical styles.
Players in the know have long understood that one of the secrets to great overdriven tone is power amp overdrive, and lower-powered amps are key to turning up and achieving that cranked power amp sound without overwhelming volume levels. The Gibson Falcon 20 1x12 Combo is ideal for those demanding touch-sensitive, nuanced response at the low to medium end of the gain and power spectrum, with a harmonically rich blend of vintage power-amp overdrive when turned up. All this tonal magic is brought to life via the vintage voice from a 12” Jensen Blackbird Alnico speaker, which perfectly complements the volume range and Class A power section. Players can select between Full, Half, or Low (12, 5, or 1-Watt) power modes of patented Multi-WattTM, 6V6, Pure Class A Power, or 15, 6, or 2-Watts with optional 6L6 Power Tubes, providing three levels of expressive, vintage Gibson tone and feel. This power flexibility enables even more ways to transition in and out of clip seamlessly and musically and making the Falcon 20 an ideal amp for club gigs, home practice, and recording purposes. With its modern refinements, high-end performance, and boutique construction, the Falcon 20 soars high above even the most prized vintage Gibson gems.
While inspired by the Gibson Falcon amps from the 1960s, this all-new Petaluma, California, USA-built design from renowned amp pioneer Randall Smith and the MESA/Boogie Design Team sets a new bar in low-power tone. The Falcon 20 stands apart from its predecessors due to the constructional upgrades and tonal improvements unearthed over Randall’s five decades of tube amp design experience and performance- pushing ideology that deliver nothing less than astonishing results.
The Falcon 20 features single-channel simplicity with a focus on great tone and ease of use. The ultra-simple, pure signal path design has controls consisting of Volume and Tone, plus the addition of footswitchable Reverb and Tremolo, which add dimensionality and motion and immensely increase the amp’s enjoyment and usefulness over a wide range of musical styles.
Players in the know have long understood that one of the secrets to great overdriven tone is power amp overdrive, and lower-powered amps are key to turning up and achieving that cranked power amp sound without overwhelming volume levels. The Gibson Falcon 20 1x12 Combo is ideal for those demanding touch-sensitive, nuanced response at the low to medium end of the gain and power spectrum, with a harmonically rich blend of vintage power-amp overdrive when turned up. All this tonal magic is brought to life via the vintage voice from a 12” Jensen Blackbird Alnico speaker, which perfectly complements the volume range and Class A power section. Players can select between Full, Half, or Low (12, 5, or 1-Watt) power modes of patented Multi-WattTM, 6V6, Pure Class A Power, or 15, 6, or 2-Watts with optional 6L6 Power Tubes, providing three levels of expressive, vintage Gibson tone and feel. This power flexibility enables even more ways to transition in and out of clip seamlessly and musically and making the Falcon 20 an ideal amp for club gigs, home practice, and recording purposes. With its modern refinements, high-end performance, and boutique construction, the Falcon 20 soars high above even the most prized vintage Gibson gems.
Product Name | Gibson Amplifiers Falcon 20 1x12” Tube Guitar Combo Amplifier |
---|---|
Brand | Gibson Amplifiers |
Condition | New |
MPN | 1.FA20.CO.J |
UPC | 809404079700 |
Shipping Option | Free Shipping to the Continental U.S. |
What's in the Box?
- Gibson Amplifiers Falcon 20 1x12” Tube Guitar Combo Amplifier
- 2 Button Footswitch
- Fitted Slipcover
- Built in Petaluma, California
- All-Tube Amplifier: 2x 6V6 Power Tube (optional 2x 6L6) / 4x 12AX7 Preamp Tubes
- Pure Class A Power
- Patented Multi-WattTM Power, featuring Duo-ClassTM wiring, providing power choices of FULL power (approx. 12 Watts) - 2x 6V6
- Push-Pull, Class A, Pentode; HALF power (approx. 5 Watts) - 2x 6V6 Push-Pull, Class A, Triode; or LOW power (approx. 1 Watt) -
- 1x 6V6 Single-Ended, Class A, Pentode (approx. 15 Watts, 6 Watts, and 2 Watts with optional 6L6 Power Tubes)
- Cathode Biased, Maintenance-Free
- Single Channel Simplicity – Channel Features: Normal & Low (Cleaner) Inputs, Volume, Tone, Reverb, Tremolo Depth & Frequency Controls
- Footswitchable, All-Tube Spring Reverb
- Footswitchable, All-Tube Tremolo
- Monitor (Slave) DI Output – Fixed Attenuated from the Speaker Output
- Polished Stainless Steel Control Faceplate
- Aluminum Chassis
- 2 Button Footswitch Included
- Slipcover Included
- 12” Jensen Blackbird Alnico Speaker
General Information |
|
---|---|
Product Name & Format | Falcon 5 1x10 Combo |
Product Series | Falcon Series |
Build Location | Built In Petaluma, CA, with the World’s Finest Materials |
Quick Overview |
|
Wattage | Full (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) |
Power Tube Type | 1x 6V6 (or optional 1x 6L6) |
Channels & Modes | 1 Channel / 2 Modes (Normal or Low) |
Mode Voicings/Styles | Normal & Low Inputs (NORMAL = Clean to Overdrive, LOW = Cleaner) |
Graphic EQ / Reverb / FX / Solo | Reverb |
Speaker(s) & Impedance | 10” Jensen Blackbird ALNICO Speaker, 8 Ohm |
Weight | 26 lbs. (11.79 kg.) |
Dimensions | 16 1/8” (40.96 cm) H x 16” (40.64 cm) W x 8 7/8” (22.54 cm) D (Height measurement includes rubber feet and the top of the handle in its flat position) |
Amplifier Features |
|
Amp Type | Tube |
Chassis Material | Aluminum Chassis with Polished Stainless-Steel Faceplate |
Rectifier Type | Silicon Diodes |
Preamp Tubes | 3x 12AX7 |
Power Amp Tubes | 1x 6V6 (or optional 1x 6L6) |
Maintenance Free Fixed Bias | Cathode Biased, which is also Maintenance Free |
Wattage(s) Quick Reference (See Power Amp Details for more Info) | Full (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) |
Built-in Power Amp Attenuation | Yes – 2-Way Attenuator Switch provides Full or Low power operation |
Power Amp Details (Class & Wattage) | Class A Power with selectable, global Full/Low Power Attenuator Switch - Provides two power options: Choose from Full Power (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) |
Types of Style Modes per Channel | Single Channel with 2 Inputs: Normal Input = Clean to Overdrive, Low Input = Clean |
Channel Controls | Volume, Tone, & Reverb |
Reverb / Effects & Bypass Options | All-Tube, Spring Reverb |
External Switching Jack Options and/or MIDI | MIDI Switchable/Programmable via Control Change and Program Change messages, with 256 Preset Location (MIDI IN, MIDI Thru/Out, MIDI Channel, & Store Switches) – Controls Channels 1, 2, 3, Reverb, FX Loop, & Graphic EQ |
Speaker Outputs | One 8 Ohm and Two 4 Ohm |
Slave Output | Yes - Fixed-Attenuated “MONITOR” Output from the Speaker Output |
Accessories |
|
Slipcover | Included - Fitted Slipcover |
Cabinet Features |
|
Cabinet Material | Marine Grade, Baltic Birch |
Standard Finish Options (no extra cost) | Cream Bronco Vinyl with Oxblood Grille |
Speaker(s) & Impedance | 1 - 8 Ohm Jensen Blackbird ALNICO 40 / Total Load = 8 Ohms |
Additional Cabinet Features |
|
Extra Features | Vintage-Inspired Construction for Tone & Portability |
Weight & Dimensions |
|
Weight | 26 lbs. (11.79 kg.) |
Height | 16 1/8” (40.96 cm) (Height measurement includes rubber feet and the top of the handle in its flat position) |
Width | 16” (40.64 cm) |
Depth | 8 7/8” (22.54 cm) |
Gibson Amplifiers Falcon 20 1x12” Tube Guitar Combo Amplifier
Details
Gibson is proud to introduce the new Falcon 20 1x12 Combo amplifier. It pays homage to Gibson’s legendary past as one of the world’s first manufacturers of electric guitar amplifiers. The Falcon 20 resurrects the Gibson amp icon and delivers vintage tone, reimagined in an upgraded rendering with valuable new features and all the original magic intact, and then some.
While inspired by the Gibson Falcon amps from the 1960s, this all-new Petaluma, California, USA-built design from renowned amp pioneer Randall Smith and the MESA/Boogie Design Team sets a new bar in low-power tone. The Falcon 20 stands apart from its predecessors due to the constructional upgrades and tonal improvements unearthed over Randall’s five decades of tube amp design experience and performance- pushing ideology that deliver nothing less than astonishing results.
The Falcon 20 features single-channel simplicity with a focus on great tone and ease of use. The ultra-simple, pure signal path design has controls consisting of Volume and Tone, plus the addition of footswitchable Reverb and Tremolo, which add dimensionality and motion and immensely increase the amp’s enjoyment and usefulness over a wide range of musical styles.
Players in the know have long understood that one of the secrets to great overdriven tone is power amp overdrive, and lower-powered amps are key to turning up and achieving that cranked power amp sound without overwhelming volume levels. The Gibson Falcon 20 1x12 Combo is ideal for those demanding touch-sensitive, nuanced response at the low to medium end of the gain and power spectrum, with a harmonically rich blend of vintage power-amp overdrive when turned up. All this tonal magic is brought to life via the vintage voice from a 12” Jensen Blackbird Alnico speaker, which perfectly complements the volume range and Class A power section. Players can select between Full, Half, or Low (12, 5, or 1-Watt) power modes of patented Multi-WattTM, 6V6, Pure Class A Power, or 15, 6, or 2-Watts with optional 6L6 Power Tubes, providing three levels of expressive, vintage Gibson tone and feel. This power flexibility enables even more ways to transition in and out of clip seamlessly and musically and making the Falcon 20 an ideal amp for club gigs, home practice, and recording purposes. With its modern refinements, high-end performance, and boutique construction, the Falcon 20 soars high above even the most prized vintage Gibson gems.
While inspired by the Gibson Falcon amps from the 1960s, this all-new Petaluma, California, USA-built design from renowned amp pioneer Randall Smith and the MESA/Boogie Design Team sets a new bar in low-power tone. The Falcon 20 stands apart from its predecessors due to the constructional upgrades and tonal improvements unearthed over Randall’s five decades of tube amp design experience and performance- pushing ideology that deliver nothing less than astonishing results.
The Falcon 20 features single-channel simplicity with a focus on great tone and ease of use. The ultra-simple, pure signal path design has controls consisting of Volume and Tone, plus the addition of footswitchable Reverb and Tremolo, which add dimensionality and motion and immensely increase the amp’s enjoyment and usefulness over a wide range of musical styles.
Players in the know have long understood that one of the secrets to great overdriven tone is power amp overdrive, and lower-powered amps are key to turning up and achieving that cranked power amp sound without overwhelming volume levels. The Gibson Falcon 20 1x12 Combo is ideal for those demanding touch-sensitive, nuanced response at the low to medium end of the gain and power spectrum, with a harmonically rich blend of vintage power-amp overdrive when turned up. All this tonal magic is brought to life via the vintage voice from a 12” Jensen Blackbird Alnico speaker, which perfectly complements the volume range and Class A power section. Players can select between Full, Half, or Low (12, 5, or 1-Watt) power modes of patented Multi-WattTM, 6V6, Pure Class A Power, or 15, 6, or 2-Watts with optional 6L6 Power Tubes, providing three levels of expressive, vintage Gibson tone and feel. This power flexibility enables even more ways to transition in and out of clip seamlessly and musically and making the Falcon 20 an ideal amp for club gigs, home practice, and recording purposes. With its modern refinements, high-end performance, and boutique construction, the Falcon 20 soars high above even the most prized vintage Gibson gems.
Product Name | Gibson Amplifiers Falcon 20 1x12” Tube Guitar Combo Amplifier |
---|---|
Brand | Gibson Amplifiers |
Condition | New |
MPN | 1.FA20.CO.J |
UPC | 809404079700 |
Shipping Option | Free Shipping to the Continental U.S. |
What's in the Box?
- Gibson Amplifiers Falcon 20 1x12” Tube Guitar Combo Amplifier
- 2 Button Footswitch
- Fitted Slipcover
Features
- Built in Petaluma, California
- All-Tube Amplifier: 2x 6V6 Power Tube (optional 2x 6L6) / 4x 12AX7 Preamp Tubes
- Pure Class A Power
- Patented Multi-WattTM Power, featuring Duo-ClassTM wiring, providing power choices of FULL power (approx. 12 Watts) - 2x 6V6
- Push-Pull, Class A, Pentode; HALF power (approx. 5 Watts) - 2x 6V6 Push-Pull, Class A, Triode; or LOW power (approx. 1 Watt) -
- 1x 6V6 Single-Ended, Class A, Pentode (approx. 15 Watts, 6 Watts, and 2 Watts with optional 6L6 Power Tubes)
- Cathode Biased, Maintenance-Free
- Single Channel Simplicity – Channel Features: Normal & Low (Cleaner) Inputs, Volume, Tone, Reverb, Tremolo Depth & Frequency Controls
- Footswitchable, All-Tube Spring Reverb
- Footswitchable, All-Tube Tremolo
- Monitor (Slave) DI Output – Fixed Attenuated from the Speaker Output
- Polished Stainless Steel Control Faceplate
- Aluminum Chassis
- 2 Button Footswitch Included
- Slipcover Included
- 12” Jensen Blackbird Alnico Speaker
Tech Specs
General Information |
|
---|---|
Product Name & Format | Falcon 5 1x10 Combo |
Product Series | Falcon Series |
Build Location | Built In Petaluma, CA, with the World’s Finest Materials |
Quick Overview |
|
Wattage | Full (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) |
Power Tube Type | 1x 6V6 (or optional 1x 6L6) |
Channels & Modes | 1 Channel / 2 Modes (Normal or Low) |
Mode Voicings/Styles | Normal & Low Inputs (NORMAL = Clean to Overdrive, LOW = Cleaner) |
Graphic EQ / Reverb / FX / Solo | Reverb |
Speaker(s) & Impedance | 10” Jensen Blackbird ALNICO Speaker, 8 Ohm |
Weight | 26 lbs. (11.79 kg.) |
Dimensions | 16 1/8” (40.96 cm) H x 16” (40.64 cm) W x 8 7/8” (22.54 cm) D (Height measurement includes rubber feet and the top of the handle in its flat position) |
Amplifier Features |
|
Amp Type | Tube |
Chassis Material | Aluminum Chassis with Polished Stainless-Steel Faceplate |
Rectifier Type | Silicon Diodes |
Preamp Tubes | 3x 12AX7 |
Power Amp Tubes | 1x 6V6 (or optional 1x 6L6) |
Maintenance Free Fixed Bias | Cathode Biased, which is also Maintenance Free |
Wattage(s) Quick Reference (See Power Amp Details for more Info) | Full (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) |
Built-in Power Amp Attenuation | Yes – 2-Way Attenuator Switch provides Full or Low power operation |
Power Amp Details (Class & Wattage) | Class A Power with selectable, global Full/Low Power Attenuator Switch - Provides two power options: Choose from Full Power (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) |
Types of Style Modes per Channel | Single Channel with 2 Inputs: Normal Input = Clean to Overdrive, Low Input = Clean |
Channel Controls | Volume, Tone, & Reverb |
Reverb / Effects & Bypass Options | All-Tube, Spring Reverb |
External Switching Jack Options and/or MIDI | MIDI Switchable/Programmable via Control Change and Program Change messages, with 256 Preset Location (MIDI IN, MIDI Thru/Out, MIDI Channel, & Store Switches) – Controls Channels 1, 2, 3, Reverb, FX Loop, & Graphic EQ |
Speaker Outputs | One 8 Ohm and Two 4 Ohm |
Slave Output | Yes - Fixed-Attenuated “MONITOR” Output from the Speaker Output |
Accessories |
|
Slipcover | Included - Fitted Slipcover |
Cabinet Features |
|
Cabinet Material | Marine Grade, Baltic Birch |
Standard Finish Options (no extra cost) | Cream Bronco Vinyl with Oxblood Grille |
Speaker(s) & Impedance | 1 - 8 Ohm Jensen Blackbird ALNICO 40 / Total Load = 8 Ohms |
Additional Cabinet Features |
|
Extra Features | Vintage-Inspired Construction for Tone & Portability |
Weight & Dimensions |
|
Weight | 26 lbs. (11.79 kg.) |
Height | 16 1/8” (40.96 cm) (Height measurement includes rubber feet and the top of the handle in its flat position) |
Width | 16” (40.64 cm) |
Depth | 8 7/8” (22.54 cm) |
Reviews
- Choosing a selection results in a full page refresh.
- Opens in a new window.