Skip to product information
1 of 5

Rode Wireless GO III Dual-channel Wireless Microphone System

Rode Wireless GO III Dual-channel Wireless Microphone System

On order with the manufacturer!

View full details
  • Details
  • Features
  • Tech Specs
  • Reviews

The third generation of the world’s most popular wireless microphone, now with 32-bit float recording, intelligent GainAssist technology, improved built-in mics and a host of professional features and enhancements – the ultimate creative companion.

The World’s Most Popular Wireless Microphone

The original Wireless GO was the first of its kind, establishing an entirely new category of compact wireless microphone that soon became the go-to audio tool for content creators around the world. Now, the third-generation Wireless GO builds on this legacy, delivering every feature and convenience a creator could possibly need while maintaining the intuitive grab-and-go operation that the range is known for.

State-of-the-art Wireless Audio

Utilising RØDE’s state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, the Wireless GO delivers crystal-clear, incredibly stable audio with a range of up to 260m.

Say Goodbye to Clipping

For the ultimate peace of mind, each of the Wireless GO’s transmitters feature over 40 hours of 32-bit float on-board recording. This means that your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too quiet or too loud – even audio that clipped!

Flawless Sound with Every Take

The Wireless GO offers a wide range of features to help you capture incredibly clean and intelligible audio for your content. Intelligent GainAssist technology automatically balances levels on-the-fly, granular gain adjustment and tailored camera presets allow for more refined control over your signal, and the built-in microphones feature the same upgraded capsules and preamps as found in the Wireless PRO. Capture flawless sound with every take.

The Wireless Mic for Every Setup and Every Setting

With both digital and analog outputs, the Wireless GO is just at home connected to a DSLR or mirrorless camera as it is plugged into an iPhone or Android smartphone – you can even use it as a USB microphone with your computer.

Gain the Professional Edge

Monitor your audio in the field with the Wireless GO’s high-power headphone output, ensure your lavaliers stay connected on set with 3.5mm locking connectors, and extend your system’s battery in the field with plug-in power detect. The Wireless GO has a host of professional features designed to make your creative life a whole lot simpler.

More Information
Product Name Rode Wireless GO III Dual-channel Wireless Microphone System
Brand Rode
MPN wigogen3
UPC 698813010462

What's in the Box?

  • 2 x Transmitters (TX)
  • 1 x Receiver (RX)
  • 1 x SC33 Charging Hub
  • 1 x SC2 TRS to TRS Cable
  • 1 x SC21 USB-C to Lightning Cable
  • 1 x SC22 USB-C to USB-C Cable
  • 3 x Furry Windshields
  • 1 x Carry Pouch
  • Dual-channel compact wireless microphone system
  • RØDE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio at ranges up to 260m (line of sight)
  • Over 40 hours of 32-bit float on-board recording for the recovery of clipped or quiet audio files
  • Intelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera
  • Universal compatibility with cameras, smartphones and computers for ultimate flexibility
  • Locking lavalier connectors for complete security and peace of mind
  • Headphone monitoring with on-board level control
  • Automatic plug-in power detect for extended battery life
  • Easy configuration on a computer or smartphone via RØDE Central
  • Bright LCD display and intuitive controls for quickly and easily adjusting settings on-the-fly
  • Compatible with all RØDE Series IV devices, including RØDECaster Pro II and RØDECaster Duo, RØDECaster Video, Wireless PRO, Interview PRO and more
  • Designed and made in RØDE’s precision facilities in Sydney, Australia

Specifications

Polar Pattern Omnidirectional
Frequency Range 20 Hz – 20 kHz
Maximum SPL 135 dB SPL
Equivalent Noise (A-Weighted) 21 dBA
Signal-to-noise Ratio 73 dB
Transmission Range Over 100m
Digital Connectivity USB-C [for Wireless Micro (USB-C)]
Lightning [for Wireless Micro (Lightning)]
Sample Rate 48kHz
Bit Depth 24-bit
Operating System Requirements iOS 14 and above (for Lightning and USB-C)
Android 11 and above (for USB-C only)
Operating Time 7 hours
Power Requirements TX: In-built rechargeable lithium-ion battery, charged via Pogo-pin contacts to Charging Case (5V, 0.1A)
RX (USB-C): 5V/0.1A
RX (Lightning): 3.5V to 4.4V/0.1A

Rode Wireless GO III Dual-channel Wireless Microphone System

Details

The third generation of the world’s most popular wireless microphone, now with 32-bit float recording, intelligent GainAssist technology, improved built-in mics and a host of professional features and enhancements – the ultimate creative companion.

The World’s Most Popular Wireless Microphone

The original Wireless GO was the first of its kind, establishing an entirely new category of compact wireless microphone that soon became the go-to audio tool for content creators around the world. Now, the third-generation Wireless GO builds on this legacy, delivering every feature and convenience a creator could possibly need while maintaining the intuitive grab-and-go operation that the range is known for.

State-of-the-art Wireless Audio

Utilising RØDE’s state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, the Wireless GO delivers crystal-clear, incredibly stable audio with a range of up to 260m.

Say Goodbye to Clipping

For the ultimate peace of mind, each of the Wireless GO’s transmitters feature over 40 hours of 32-bit float on-board recording. This means that your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too quiet or too loud – even audio that clipped!

Flawless Sound with Every Take

The Wireless GO offers a wide range of features to help you capture incredibly clean and intelligible audio for your content. Intelligent GainAssist technology automatically balances levels on-the-fly, granular gain adjustment and tailored camera presets allow for more refined control over your signal, and the built-in microphones feature the same upgraded capsules and preamps as found in the Wireless PRO. Capture flawless sound with every take.

The Wireless Mic for Every Setup and Every Setting

With both digital and analog outputs, the Wireless GO is just at home connected to a DSLR or mirrorless camera as it is plugged into an iPhone or Android smartphone – you can even use it as a USB microphone with your computer.

Gain the Professional Edge

Monitor your audio in the field with the Wireless GO’s high-power headphone output, ensure your lavaliers stay connected on set with 3.5mm locking connectors, and extend your system’s battery in the field with plug-in power detect. The Wireless GO has a host of professional features designed to make your creative life a whole lot simpler.

More Information
Product Name Rode Wireless GO III Dual-channel Wireless Microphone System
Brand Rode
MPN wigogen3
UPC 698813010462

What's in the Box?

  • 2 x Transmitters (TX)
  • 1 x Receiver (RX)
  • 1 x SC33 Charging Hub
  • 1 x SC2 TRS to TRS Cable
  • 1 x SC21 USB-C to Lightning Cable
  • 1 x SC22 USB-C to USB-C Cable
  • 3 x Furry Windshields
  • 1 x Carry Pouch
Features
  • Dual-channel compact wireless microphone system
  • RØDE’s state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption for crystal-clear, incredibly stable audio at ranges up to 260m (line of sight)
  • Over 40 hours of 32-bit float on-board recording for the recovery of clipped or quiet audio files
  • Intelligent GainAssist technology, flexible output gain control and safety channel for ensuring pristine audio when recording direct to camera
  • Universal compatibility with cameras, smartphones and computers for ultimate flexibility
  • Locking lavalier connectors for complete security and peace of mind
  • Headphone monitoring with on-board level control
  • Automatic plug-in power detect for extended battery life
  • Easy configuration on a computer or smartphone via RØDE Central
  • Bright LCD display and intuitive controls for quickly and easily adjusting settings on-the-fly
  • Compatible with all RØDE Series IV devices, including RØDECaster Pro II and RØDECaster Duo, RØDECaster Video, Wireless PRO, Interview PRO and more
  • Designed and made in RØDE’s precision facilities in Sydney, Australia
Tech Specs

Specifications

Polar Pattern Omnidirectional
Frequency Range 20 Hz – 20 kHz
Maximum SPL 135 dB SPL
Equivalent Noise (A-Weighted) 21 dBA
Signal-to-noise Ratio 73 dB
Transmission Range Over 100m
Digital Connectivity USB-C [for Wireless Micro (USB-C)]
Lightning [for Wireless Micro (Lightning)]
Sample Rate 48kHz
Bit Depth 24-bit
Operating System Requirements iOS 14 and above (for Lightning and USB-C)
Android 11 and above (for USB-C only)
Operating Time 7 hours
Power Requirements TX: In-built rechargeable lithium-ion battery, charged via Pogo-pin contacts to Charging Case (5V, 0.1A)
RX (USB-C): 5V/0.1A
RX (Lightning): 3.5V to 4.4V/0.1A
Reviews